117
STAR Options From the MAIN MENU, press F4, F3, F7 and then F3 twice to access
this screen.
This screen CANNOT be accessed for JT1000 model radios. From this
screen, you can configure additional GE STAR signalling options.
Function Key Descriptions
F5 - PRINT Prints the current system configuration.
F9 - DEFAULT Resets the fields on this screen to their default values.
Field Definitions
Pretime Enter the desired value directly or use the UP/DOWN arrow keys to
make your selection. Pretime is the period of time between transmitter
key-up and the first bit of a data transmission during which the
transmitted carrier may be modulated or unmodulated. In the case of
STAR data, the carrier is unmodulated. This pretime period allows the
receiving unit to stabilize so the data can be recovered. The duration
of pretime can be set from 0 (zero) and 2550 ms in 10-ms increments.
The default is 500 ms.
Number of Impolites Enter the desired value directly or use the UP/DOWN arrow keys to
make your selection. This is the number of times the radio will
transmit in an “impolite” fashion. An impolite transmission is one
where the radio transmits regardless of whether or not anyone else is
currently transmitting on the same channel. This number can range
from 0 (zero) to 254 in increments of 1. A value of Infinite is also
available in which case the radio will continue to transmit until an
acknowledgment is received, the battery runs down, or the radio is
powered off.
The default is 15.
DCGCC
MOTOROLA Radio Service Software Use <: keys to scroll value.
HT/JT1000/VISAR Model : Use <Enter> to go to next feature.
Serial:
CHANGE:RADIO:SIG:STAR:OPT
STAR Options
------------
Pretime (ms)................. 500
Number of Impolites............15
Emerg Long Press Period (sec)...5
Mandown Pre-Alert Delay (sec)...5
Mandown Post-Alert Delay (sec)..5
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT DEFAULT EXIT
To Next Page
Loading...
