Motorola VISAR - Changing a Field Value

12
Changing A Field
Value
The keys commonly used in the RSS to change a field value and their
respective functions are listed below.
Tab or Enter Used to accept data currently in the field and move the prompt
forward one field. If the entry is not accepted (i.e., is probably not a
valid value), an error beep will sound. Use Shift-Tab to move to the
previous field.
Del Used to erase the current character in a field.
PgUp and PgDn Used to display the previous/next page of information on the screen.
The Num Lock key must be off.
UP/DOWN Arrow Keys Use to increment/decrease a field value or scroll through the available
values.
LEFT/RIGHT Arrow Keys Used to move the cursor within the field.
Backspace Used to erase the previous character and move the cursor left.
RSS fields are of three basic types:
Information fields Non-editable fields which cannot be altered or changed.
Scrollable fields Contain a range of values or several options from which you can select
the desired value/option. To edit or change a choice, press the arrow
key(s).
Direct-entry fields The desired value must be typed in using the keyboard. To edit or
change a choice, type in an acceptable value.
Changing a field’s value is typically done either by scrolling through a
list of options (in scrollable fields) or by typing in a correct or
acceptable value (in direct-entry fields). Scrolling is accomplished
using the arrow keys.
A