Motorola VISAR - Appendix E - HT;JT1000;VISAR RSS Cross Reference

175
HT/JT1000/VISAR RSS
Cross Reference E
The following tables list all the fields that affect the more complex features of
the HT/JT1000/VISAR radio regardless of screen location.
Quik-Call II Signalling
Field Function Location
Tone A Frequency Set frequency for Tone A CHANGE:RADIO:SIG:QUIK-CALL II
Tone B Frequency Set frequency for Tone B CHANGE:RADIO:SIG:QUIK-CALL II
Tone C Frequency Set frequency for Tone C CHANGE:RADIO:SIG:QUIK-CALL II
Tone D Frequency Set frequency for Tone D CHANGE:RADIO:SIG:QUIK-CALL II
Auto Reset Enables Auto-Reset Timer for Quik-Call II CHANGE:RADIO:SIG:QUIK-CALL II
Long Tone B Duration Sets duration for a Long Tone B detect CHANGE:RADIO:SIG:QUIK-CALL II
Sleep Period Period of time radio will be dormant in
Battery Saver
CHANGE:RADIO:SIG:QUIK-CALL II
Auto Reset Timer Radio-wide setup of Auto-Reset Timer
length
CHANGE:RADIO:SYS CONFIG
Receive Squelch Configures type of call + TPL/DPL required
for unmuting
CHANGE:CHANNEL
Signalling Muting
Condition
Determines whether radio responds to
only Selective Call Signalling or to Normal
Dispatch as well
CHANGE:CHANNEL:OPTIONS
Mode Switch Determines whether Quik-Call II Squelch
can be defeated with the Toggle Switch
CHANGE:RADIO:MODE SWITCH
Quik-Call II Scan Enables Quik-Call II Decoder in Scan on
Quik-Call II-enabled channels
CHANGE:RADIO:SCAN:CONFIG