Motorola VISAR - Print Service Menu

159
Print Service Menu From the MAIN MENU, press F5 and then F2 to access this menu.
You must use the GET/SAVE functions to first read or get a codeplug
for printing radio configuration data.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if
the printer is not set up properly. For best results, configure the
printer as an IBM ProPrinter or an Epson FX/MX having factory
default settings. The default number of lines per page is 66.
Function Key Descriptions
F2 - PRINT XMIT Prints a summary of Transmit Alignment information.
F3 - PRINT RECEIVE Prints a summary of Receive Alignment information.
F4 - PRINT SIG Prints a summary of the Signalling Alignment information.
F6 - PRINT MODE Prints a summary of Mode Alignment information.
F8 - PRINT FREQ Prints a summary of Frequency Alignment information.
F9 - PRINT ALL Prints all the above service information subsets mentioned above.
EB
MOTOROLA Radio Service Software Select a function key, F1-F10.
HT/JT1000/VISAR Model :
Serial:
PRT MAIN:SERVICE
Print Service Menu
------------------
F1 - HELP
F2 - Transmit Alignment Menu
F3 - Receive Alignment Menu
F4 - Signalling Alignment
F5 -
F6 - Test Mode
F7 -
F8 - Tuning Frequencies
F9 - Print All the Above
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT PRINT PRINT PRINT PRINT PRINT EXIT
XMIT RECEIVE SIG MODE FREQ ALL