Motorola VISAR - VISAR Configuration Options ( Models with Display Only )

77
VISAR
Configuration
Options (Models
with Display only)
At the MAIN MENU, press F4, F3 and then F2 twice to access this
screen.
This menu allows the user to access the systems configuration options
for VISAR radios only. This screen cannot be accessed for HT 1000 or
JT1000 models.
Function Key Descriptions
F5 - PRINT Prints the current system configuration.
F9 - DEFAULT Resets the fields on this screen to their default values.
Field Definitions
Display Power-Up State This field allows you to specify whether the display will be in Normal
or Inverted state on radio power-up.
The default is Normal.
DCBB
MOTOROLA Radio Service Software Use <: keys to scroll values.
HT/JT1000/VISAR Model : H05UCD6AA4AN Use <Enter> to go to next feature.
Serial:
CHANGE:RADIO:SYS CONFIG:VISAR
VISAR CONFIGURATION OPTIONS
---------------------------
Display Power-Up State.........Normal Channel Wrap-around............Enabled
Ch. Select Lock/Display Flip.....Lock Channel Wrap-around Alert......Enabled
Channel Selector Lock Alert...Enabled Channel Selector Alert........Disabled
Auto-backlight................Enabled
Backlight Timer (sec)...............5
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT DEFAULT EXIT
Normal The display will be readable from the front, as when the
radio is held in the hand.
Inverted The display will be readable from the top, as when the
radio is worn on the belt.