Motorola VISAR - Clone (Copy) Data to Another Radio

61

Clone (Copy) Data

to Another Radio

From the MAIN MENU, press F3 and then F5 to clone data from one

radio to another.

A radio and a RIB must be properly connected to the computer and the power

turned on before you attempt the PROGRAM RADIO (F8) function. The

CLONE radio function is used to copy codeplug information from one

radio to another. Only radios with the same model number can be cloned.

Note: Please read the important notes on Cloning provided

on the following page.

Cloning the radio will replace the radio's codeplug with the contents

of the current work space. The source of the work space data can be

either an archive ﬁle or another radio. Pressing F8 will bring up the

screen shown below.

Attach the radio whose contents you want to replace with the current

work space, and press F8 to continue cloning or F10 to cancel cloning.

CE

MOTOROLA Radio Service Software Select a function key, F1-F10.

HT/JT1000/VISAR Model :

Serial:

GET-SAVE-CLONE

Get-Save-Clone Menu

-------------------

F1 - HELP

F2 - Read Data from Radio

F3 - Get Workspace Data from Archive File

F4 -

F5 - Clone (Copy) Data to another Radio

F6 -

F7 - Save Workspace Data to Archive File

F8 - Program Data into Radio

F9 -

F10 - EXIT, Return to Main Menu

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10

HELP READ GET CLONE SAVE PROGRAM EXIT

RADIO FILE FILE RADIO

CLONING the radio will replace the contents of the radio's

codeplug with the current contents of the workspace.

F8 - continue the cloning request.

F10 - cancel cloning request.

Press F8 or F10.