Motorola VISAR - Receiver Alignment Menu

37
Receiver Alignment
Menu
From the MAIN MENU, press F2 and then F3 to access this screen.
From this menu, you can navigate to six screens where various
alignment settings are specified. Standard periodic receiver alignment
procedures are performed from this menu. Refer to your Radio Service
Manual for Receive Alignment procedures.
Function Key
Descriptions
F2 - F7 Refer to your Radio Service Manual for these procedures. These
procedures should only be attempted by qualified service personnel.
BC
MOTOROLA Radio Service Software Please make sure <Caps Lock> is not
HT/JT1000/VISAR Model: enabled before pressing F2-F9.
Serial:
SERVICE:RCVR ALIGN
Receive Alignment Menu
----------------------
F1 - HELP
F2 - Front End Bandpass Filter Alignment
F3 - Rated Audio Alignment
F4 - Squelch Alignment 25/30kHz
F5 - Squelch Alignment 20kHz
F6 - Squelch Alignment 12.5kHz
F7 - VCO Crossover Alignment
F8 -
F9 -
F10 - Exit, Return to Service Menu
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP FE BP RATED SQUELCH SQUELCH SQUELCH VCO EXIT
FILTER AUDIO 25/30 kHz 20kHz 12.5 kHz XOVER
!
Caution
These procedures should be attempted only by
qualified service personnel. Failure to perform
alignment procedures properly may result in seriously
degraded radio or system performance.