Motorola VISAR - Service Menu Functions; Servicing the Radio Using the RSS

21
Service Menu Functions 2
Servicing the Radio
Using the RSS
This section contains instructions on how to use each of the SERVICE
MENU related screens and procedures to align the radio. Detailed
alignment procedures and service instructions are included in the HT 1000,
JT1000 or VISAR Radio Service Manual and are therefore not included in
this manual. Refer to the relevant Service Manual for all alignment
values and procedures.
Note: All functions (supported and unsupported) will be
displayed in the menu’s working area. The unsupported
functions (based on the radio’s model or options) will NOT be
displayed in the F-key ID area.
Menu Map
Transmit Alignment Menu
B
Reference Frequency Alignment
Transmit Power Alignment
Transmit Deviation Balance (Compensation)
C
E
B
D
F
C
D
E
C
Transmit Deviation Limit Alignment
Receiver Alignment Menu
Rated Audio Alignment
Squelch Alignment (25/30 kHz)
Squelch Alignment (20 kHz)
Squelch Alignment (12.5 kHz)
C
F
C
D
B
MDC Deviation Alignment
DTMF Deviation Alignment
Single Tone Deviation Alignment
Test Mode
Signalling Alignment Menu
F
Transmit Deviation Limit Alignment:
Alignment
Reference Softpot
G
Transmit VCO Crossover Alignment
Front End Bandpass Filter Alignment
B
G
VCO Crossover Alignment
SERVICE MENU
G
Controller Board Initialization