162
Print Codeplug Menu At the MAIN MENU, press F5 and then F3 to access this screen.
The PRINT function is used to produce permanent records of codeplug
configurations. A printer is required and should be connected to your
computer according to instructions in the user’s manual that came
with your computer. Graphics capability is NOT required.
You must first read or get a codeplug using the GET/SAVE functions in
order to print radio configuration data.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if
the printer is not set up properly. For best results, configure the
printer as an IBM ProPrinter or an Epson FX/MX having factory
default settings. The default number of lines per page is 66.
Function Key Descriptions
F2 - PRINT WIDE Prints out radio wide codeplug information.
F3 - PRINT CONFIG Brings up the PRINT CODEPLUG CONFIGURATION MENU.
F4 - PRINT CHAN Prints out channel configuration information.
F9 - PRINT ALL Prints out all the above codeplug information modules.
EC
MOTOROLA Radio Service Software Select a function key, F1-F10.
HT/JT1000/VISAR Model :
Serial:
PRT MAIN:CODEPLUG
Print Codeplug Menu
-------------------
F1 - HELP
F2 - Radio Wide Information
F3 - Radio Configuration Menu
F4 - Channel Configuration
F5 -
F6 -
F7 -
F8 -
F9 - Print All the Above
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT PRINT PRINT PRINT EXIT
WIDE CONFIG CHAN ALL
To Next Page
Loading...
