64
Save Workspace
Data to Archive File
From the MAIN MENU, press F3 and then F7 to access this screen.
The SAVE ARCHIVE function is used to create (or update) an archive
copy of the codeplug information on a disk. To save the contents of
the work space to a personality file, enter the desired name in the
Archive file name field, specify the correct archive path, and press F8.
The RSS will prompt you to press F8 again to save the work space to
the personality file. Press F10 to cancel the request to save the file.
If a file with the same name already exists in the archive path specified,
the RSS will display a warning and request you to press F8 to overwrite
the existing file with the contents of the work space or press F10 to
cancel the request to overwrite the file.
Note: You are STRONGLY encouraged to make an archive copy
of every radio installed or serviced in order to be able to quickly
restore customer information in case of a codeplug failure.
Function Key Descriptions
F8 - SAVE ARCHIVE Saves the archive file to the path specified (or to the default path if no
path is specified). Do NOT press F8 until you have entered the archive file
name.
Field Definitions
Archive Path This is the DOS name of the archive file. The standard DOS file naming
convention must be used, i.e., one- to eight- character alphanumeric
name appended with a one- to three-character alphanumeric
extension (xxxxxxxx.yyy). This must be no more than eight characters
with a three-character extension. The archive file name may be
changed if an alternative radio tracking method is to be used.
Archive file name Enter the name of the file in which the work space contents should be
saved.
CG
MOTOROLA Radio Service Software Use edit keys to modify entry.
HT/JT1000/VISAR Model : Use <Enter> to go to next feature.
Serial:
GET-SAVE:SAVE FILE
Save Workspace Data to Archive File
-----------------------------------
Archive path: C:\MRSS\HTJT\ARC
Archive file name: 402ATE03.40
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP SAVE EXIT
FILE
To Next Page
Loading...
