155
Singletone on PTT Use the UP/DOWN arrow keys to enable/disable this feature. If this
feature is enabled, Single Tone 1 will be enabled as defined on the
SINGLETONE CONFIGURATION screen (F4/F3/F7/F4) on this channel
whenever PTT is pressed. A sidetone can also be enabled on the
SIDEBUTTON CONFIGURATION screen (F4/F3/F3) if desired so that
the user will not talk while the Single Tone transmission is in progress.
Note: Singletone on PTT is incompatible with PTT-ID functions
(MDC, STAR, ATIS, DTMF ANI).
The default is Disabled.
Singletone on Side buttons Use the UP/DOWN arrow keys to enable/disable this feature. If this
feature is enabled, Single Tone 1 or 2 will be transmitted as defined on
the SINGLETONE CONFIGURATION screen (F4/F3/F7/F4) on this
channel by pressing a side button.
Note: This side button must be defined for Single Tone on the
SIDEBUTTON CONFIGURATION screen (F4/F3/F3).
The default is Disabled.
To Next Page
Loading...
