Motorola VISAR - Page 170

164
Print Codeplug Configuration Menu (JT1000 models only)
Print Codeplug Configuration Menu (VISAR models only)
The PRINT function is used to produce permanent records of codeplug
configurations. A printer is required and should be connected to your
computer according to instructions in the user’s manual that came
with your computer. Graphics capability is NOT required.
You must first read or get a codeplug using the GET/SAVE functions in
order to print radio configuration data.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if
the printer is not set up properly. For best results, configure the
printer as an IBM ProPrinter or an Epson FX/MX having factory
default settings. The default number of lines per page is 66.
MOTOROLA Radio Service Software Select a function key, F1-F10.
HT/JT1000/VISAR Model : H05RDD9AA7AN
Serial:
PRT MAIN:CODEPLUG:CONFIG
Print Codeplug Configuration Menu
---------------------------------
F1 - HELP
F2 - System Configuration
F3 - Side Button Configuration
F4 - Alert Tone Configuration
F5 - JT1000 Options
F6 - Mode Switch Position Assignment
F7 - Signalling Options
F8 - Scan List Channels
F9 - Print All the Above
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT PRINT PRINT PRINT PRINT PRINT PRINT PRINT EXIT
SYSTEM BUTTONS TONES JT1000 MODE SIG SCAN ALL
MOTOROLA Radio Service Software Select a function key, F1-F10.
HT/JT1000/VISAR Model : H05UCD6AA4AN
Serial:
PRT MAIN:CODEPLUG:CONFIG
Print Codeplug Configuration Menu
---------------------------------
F1 - HELP
F2 - System Configuration
F3 - Side Button Configuration
F4 - Alert Tone Configuration
F5 - VISAR Options
F6 -
F7 - Signalling Options
F8 - Scan List Channels
F9 - Print All the Above
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT PRINT PRINT PRINT PRINT PRINT PRINT EXIT
SYSTEM BUTTONS TONES VISAR SIG SCAN ALL