2. Once the search is complete, the Configurator window will display a list of all switches that were located.
Search by IP Address
Use the Search by IP Address utility to search for Moxa switches one at a time. Note that the search is
conducted by IP address, so you should be able to locate any Moxa switch that is properly connected to your
LAN, WAN, or the Internet.
1. Start by clicking the Specify by IP address icon , or by selecting Specify IP address under the List
Server menu. The Search Server with IP Address window will open. Enter the IP address of the switch
you wish to search for, and then click OK.
2. Once the search is complete, the Configurator window will add the switch to the list of switches.
Upgrade Firmware
Keep your Moxa switch up to date with the latest firmware from Moxa. Perform the following steps to upgrade
the firmware:
1. Download the updated firmware (*.rom) file from Moxa’s website (www.moxa.com).
2. Click the switch (from the Moxa EtherDevice Server Configurator window) whose firmware you wish to
upgrade to highlight it.
To Next Page
Loading...
Need help?
General
