Moxa Technologies Managed Ethernet Switch/Extender User Manual

Moxa Managed Ethernet Switch/Extender Featured Functions
3-11
NOTE
Leave Time should be at least two times more than Join Time, and Leaveall Time should be larger than
Leave Time.
System Time Settings
The Moxa switch has a time calibration function based on information from an NTP server or user specified time
and date. Functions such as automatic warning emails can therefore include time and date stamp.
NOTE
The Moxa switch does not have a real time clock. The user must update the Current Time and Current Date
to set the initial time for the Moxa switch after each reboot, especially when there is no NTP server on the LAN
or Internet connection.
Current Time
Setting Description Factory Default
User-specified time Allows configuration of the local time in local 24-hour format. None
Current Date
Setting Description Factory Default
User-specified date Allows configuration of the local date in yyyy-mm-dd format. None
Daylight Saving Time
The Daylight Saving Time settings are used to automatically set the Moxa switch’s time forward according to
national standards.
Start Date
Setting Description Factory Default
User-specified date Specifies the date that Daylight Saving Time begins. None
End Date
Setting Description Factory Default
User-specified date Specifies the date that Daylight Saving Time ends. None
Offset
Setting Description Factory Default
User-specified hour Specifies the number of hours that the time should be set
forward during Daylight Saving Time.
None
System Up Time
Indicates how long the Moxa switch remained up since the last cold start. The up time is indicated in seconds.

Moxa Technologies Managed Ethernet Switch/Extender Specifications

General

Brand	Moxa Technologies
Model	Managed Ethernet Switch/Extender
Category	Network Router
Language	English