UTC Offset
Setting Description Factory Default
0 to 255 The known UTC offset (seconds). 0
Status
Setting Description Factory Default
N/A Shows the current IEEE 1588 PTP status. N/A
PTP Port Settings
Shows the current switch PTP port settings.
System File Update
Update System Files by Remote TFTP
The Moxa switch supports saving your configuration or log file to a remote TFTP server or local host. Other
Moxa switches can also load the configuration at a later time. The Moxa switch also supports loading firmware
or configuration files from the TFTP server or a local host.
TFTP Server IP/Name
Setting Description Factory Default
IP address of TFTP
server
Specifies the IP address or name of the remote TFTP server.
Must be specified before downloading or uploading files.
None
Configuration Files Path and Name
Setting Description Factory Default
Max. 40 characters Specifies the path and file name of the Moxa switch’s
configuration file on the TFTP server.
None
Firmware Files Path and Name
Setting Description Factory Default
Max. 40 characters Specifies the path and file name of the Moxa switch’s firmware
file.
None
Log Files Path and Name
Setting Description Factory Default
Max. 40 characters Specifies the path and file name of the Moxa switch’s log file. None
After setting the desired paths and file names, click Download to download the prepared file from the remote
TFTP server, or click Upload to upload the desired file to the remote TFTP server.
To Next Page
Loading...
Need help?
General
