2. Click OK when the Export configuration to file OK message appears.
3. You may use a standard text editor, such as Notepad under Windows, to view and modify the newly created
configuration file.
Import Configuration
The Import Configuration function is used to import an entire configuration from a text file to the Moxa
switch. The utility can be used to transfer the configuration from one Moxa switch to another, by first using the
Export Configuration function (described in the previous section) to save a switch configuration to a file, and
then using the Import Configuration function. Perform the following steps to import a configuration:
1. Highlight the server (from the Moxa EtherDevice Switch list in the Configurator window’s left pane), and
then click the Import toolbar icon , or select Import Configuration from the Configuration menu.
2. Use the Open window to navigate to the text file that contains the desired configuration. Once the file is
selected, click Open to initiate the import procedure.
To Next Page
Loading...
Need help?
General
