Moxa Technologies Managed Ethernet Switch/Extender User Manual

Moxa Managed Ethernet Switch/Extender Featured Functions
3-3
Web Auto-logout (S)
Setting Description Factory Default
60 to 86400 (seconds) Disable or extend the auto-logout time for the web
management console.
0 (disabled)
Age Time (S)
Setting Description Factory Default
15 to 3825 (seconds)
The length of time that a MAC address entry can remain in the
Moxa switch. When an entry reaches its aging time, it “ages
out” and is purged from the switch, effectively cancelling frame
forwarding to that specific port.
300
CPU Loading
Setting Description Factory Default
Read-only T
he CPU usage volume in the past 5 seconds, 30 seconds, and
5 minutes
None
Free Memory
Setting Description Factory Default
Read-only The immediately free memory of the switch None
Jumbo Frame
Setting Description Factory Default
Enable Enables the Moxa switch to support the Jumbo Frame function
Disabled
Disable Disables the Jumbo Frame function
Jumbo Frame MAX (bytes)
Setting Description Factory Default
1522 to 9000 The maximum length supported by the Jumbo Frame function 9000
NOTE: “Jumbo Frame” is supported by the IKS-G6000 series and the ICS-G7000 Series.
Password
The Moxa switch provides two levels of configuration access. The admin account has read/write access of all
configuration parameters, and the user account has read access only. A user account can view the
configuration, but will not be able to make modifications.
ATTENTION
By default, a password is not assigned to the
Moxa switch
’s web, Telnet, and serial consoles. If a password is
assigned, you will be required to enter the password when you open the serial console, Telnet console, or Web
console.

Moxa Technologies Managed Ethernet Switch/Extender Specifications

General

Brand	Moxa Technologies
Model	Managed Ethernet Switch/Extender
Category	Network Router
Language	English