MPI linkcom 5 - Output Driver Configuration for AFP;IPDS

LinkCom 5 User Manual
Page 27
7.4.5 Output driver
Output data from LinkCom 5 can be handled in various ways. Using the default
setup, the data is send to a network printer. “TCP/IP Network port driver”. The IP
Address input field is a text field. Printers can be addressed using IPv4 addresses,
IPv6 addresses or DNS host names.
Example:
172.16.6.148
fe80::d2ff:50ff:fe8c:5ef8/64
printer2.company.org
The selected TCP/IP port (default is 9100) must be a RAW port type, and supported
by the printer.