LinkCom 5 User Manual
Page 44
7.7.5 Output Driver
Output data from LinkCom 5 can be handled in various ways. Using the default
setup, the data is send to a network printer. “TCP/IP Network port driver”. The IP
Address input field is a text field, so the printer can be addressed using an IPv4
address, an IPv6 address or a DNS host name.
Example:
172.16.6.148
fe80::d2ff:50ff:fe8c:5ef8/64
printer2.company.org
The selected TCP/IP port (default is 9100) must be a RAW port type, and supported
by the printer.
To Next Page
Loading...