MPI linkcom 5 - Output Driver for Transparent TCP;IP

LinkCom 5 User Manual
Page 47
7.8.2 Physical Printer
Description: Name of the Printer.
7.8.3 Strings
Strings may be used to send data to the printer before the job (Pre String
Settings), after the job (Post String Settings) or can be used to replace data send
to the printer (Replace String Settings).
7.8.4 Output Driver
Output data from LinkCom 5 can be handled in various ways. Using the default
setup, the data is send to a network printer. “TCP/IP Network port driver”. The IP