MAIN iSeries Main Menu
System: S4449156
Select one of the following:
1. User tasks
2. Office tasks
3. General system tasks
4. Files, libraries, and folders
5. Programming
6. Communications
7. Define or change the system
8. Problem handling
9. Display a menu
10. Information Assistant options
11. Client Access/400 tasks
90. Sign off
Selection or command
===> CRTDEVPRT DEVD(DEVXXXX) DEVCLS(*VRT) TYPE(3812)
MODEL(1)CTL(QVIRCD0001) FONT(087) TEXT('MANUAL CREATION OF VIRTUAL
DEVICE DEXXXX')
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information
Assistant F23=Set initial menu
Check the status of the device is Vary on Pending. The device will remain in this
state until the defined Print Server has established the session. This is done by
restarting the LinkCom 5 from PrintGuide.
To Next Page
Loading...