User Manual
Start frame
End frame
Cur frame
Interval
Turn the M rotary control to select the number of
start frame to playback (1 - 1000)
Turn the M rotary control to select the number of
end frame to playback (1 - 1000)
Turn the M rotary control to select the number of
current frame to playback (1 - 1000)
Turn the M rotary control to select the interval
between played back frames (1 ms - 1000 s)
Play back the wave continuously
Play back the wave just one time
Begin to record
Stop recording
Figure 5-53 Wave Playback
Storage: Save the current wave according to the start frame and end frame set.
Storage menu shows as follows:
Turn the M rotary control to select the number of
start frame to store (1 - 1000)
Turn the M rotary control to select the number of end
frame to store (1 - 1000)
Save the waveform record file to the internal memory
Load the waveform record file from the memory
To Next Page
Loading...
Need help?
General
