Chapter 6—Using the Software
MultiVOIP® Voice/Fax over IP Gateways 137
5. Identify Files to be Updated. Determine which files to update. Six types of files can be updated using the
FTP feature. In some cases, the file to be transferred has “Ftp” as the part of its filename just before the
suffix (or extension). So, for example, the file “mvpt1Ftp.bin” can be transferred to update the bin file
(firmware) residing in the MultiVOIP. Similarly, the file “fxo_loopFtp.cas” could be transferred to enable use
of the FXO Loop Start telephony interface in one of the analog VOIP units and the file “r2_brazilFtp.cas”
could be transferred to enable a particular telephony protocol used in Brazil. Note, however, that before any
CAS file can be used as an update, it must be renamed to CASFILE.CAS so that it overwrites and replaces the
default CAS file.
File Type File Names Description
firmware “bin” file mvpt1Ftp.bin MultiVOIP firmware file. The directory contains only one file of this
type.
factory defaults fdefFtp.cnf File contains factory default settings for user-changeable
configuration parameters. The directory contains only one file of this
type.
CAS file fxo_loopFtp.cas,
em_winkFtp.cas,
r2_brazilFtp.cas
r2_chinaFtp.cas
These telephony files are for Channel Associated Signaling. The
directory contains many CAS files, some labeled for specific
functionality, others for countries or regions where certain attributes
are standard. Any CAS file used must first be renamed to
“CASFILE.CAS.”
inbound phonebook InPhBk.tmr This file updates the inbound phonebook in the MultiVOIP unit.
outbound phonebook OutPhBk.tmr This file updates the outbound phonebook in the MultiVOIP unit.
6. Contact MultiVOIP FTP Server. Contact the FTP Server in the VOIP using a web browser or FTP client
program. Enter the IP address of the MultiVOIP’s FTP Server. If you are using a browser, the address must be
preceded by “ftp://” (otherwise reach the web interface within the MultiVOIP unit).
7. Log In. Use the User Name and password established in item #2 above. The login screens differ depending
on whether the FTP file transfer is to be done with a web browser (shown below) or with an FTP client
program (varies).
8. Use Download. You can use a web browser or an FTP client to download.
To Next Page
Loading...
