Description of Setup Buttons 15-23
15
[Page Separation]
To display: [Copy] - [Application] - [No. of Originals] - [Page Separation]
Split the left- and right-hand pages of two-page spreads for copying.
[Centering] If you select Book Original, this item is set automatically.
The original image is copied at the center of the page without enlarging it.
Cancel the setting if necessary.
[Binding Position] If [Separation], [Front Cover] or [Front & Back Covers] is selected for [Out-
put Method], select the spreading direction of the original to be scanned.
Select [Left Bind] for two-page spreads of left binding, and [Right Bind] for
two-page spreads of right binding.
Note that if the binding position is incorrectly specified, the page order of
the two-page spread is reversed between the left- and right-hand pages.
[Original Size] If the size of the original is not detected correctly, select a key indicating
the size of the original to be scanned.
[Frame Erase] Erases the shadow of the surrounding that is created when the original
cover cannot be closed properly due to the thickness of the original.
You can erase the four sides of the original to the same width. Also, you
can erase the four sides of the original to different widths.
• [Frame]: Select this option to erase the four sides of the original to the
same width. In [Erase Amount], tap [+]/[-] for the inch area, or tap [+]/[-
] or press the Keypad for the centimeter area to specify the width of the
area to be erased.
• [Individual]: Select this option to erase the four sides of the original to
different widths. Select a side ([Top], [Bottom], [Left] or [Right]) and
specify the width of the area in [Erase Amount] by tapping [+]/[-] for an
inch area and by tapping [+]/[-] or pressing the Keypad for the centim-
eter area.
If you do not want to erase the side, cancel the setting for [Erase].
[Center Erase] Erases the shadow created in the center when the original cover cannot be
closed properly due to the thickness of the original.
Specify the width of the area to erase by tapping [+]/[-] for the inch area, or
by tapping [+]/[-] or pressing the Keypad for the centimeter area.
Settings Description
Settings Description
[ON]/[OFF] Select [ON] to specify Book Separation.
[Original Margin Position] Select the two-page spread binding position from [Left Bind] and [Right
Bind].
[Original Size] If the size of the original is not detected correctly, select a key indicating
the size of the original to be scanned. If the machine cannot detect the size
of irregular sized originals or photos, manually specify the size.
To Next Page
Loading...
Need help?
General
