Description of Setup Buttons 15-58
15
Related setting (for the administrator)
- You can select whether to allow the user to overwrite or delete a registered overlay image. (Default: [Al-
low]). For details, refer to page 17-12.
[Copy Protect]
To display: [Copy] - [Application] - [Copy Security] - [Copy Protect]
Text such as "Copy" and "Private" are printed in the background pattern as concealed text.
Settings Description
[ON]/[OFF] Select [ON] to print the copy protection text.
[Copy Protect Type] Select a stamp used. The date and time can also be printed.
• [Preset Stamp]: Select a preset stamp to be printed.
• [Registered Stamp]: Select a registered stamp to be printed.
• [Date/Time]: Select a format (type) of date and time to be printed. The
date/time when the original was scanned is stamped on the paper.
• [Other]: Specify the job number, the machine's serial number, and dis-
tribution control number to be printed.
[Stamp Selection] The registration status of the stamp is displayed.
[Detail Setting] Select the color, density, size, and pattern overwriting of print characters if
necessary.
[Copy Protect] Select how to print the copy protect pattern. Also, you can set the pattern
contrast if necessary.
[Background Pattern] Select a background pattern.
[Change/Delete Position] Allows the stamp position settings to be checked, changed or deleted, if
necessary. You can change the stamp sequence and insert a space be-
tween stamps. When you select up to four stamps, you can change their
angle (within +/-45 degrees).
To Next Page
Loading...
Need help?
General
