Muratec MFX-C3680 User's Guide Copy Operations

Erasing an Unnecessary Portion for Copying 12-2
12
12 Erasing an Unnecessary Portion for Copying
Erasing text and shadows in the margins of an original ([Frame Erase])
Erases the four sides of the original by the same width amount. You can specify the width to be erased for
each side.
This is convenient when you want to erase the reception record of the header and footer of a fax, or shadow
of punch holes in the original.
For details, refer to page 15-61.
Erasing shadows outside the original ([Non-Image Area Erase])
When making copies with the ADF open and the original placed on the Original Glass, the machine detects
the outline of the original and erases shadows outside the original.
You can copy receipts and thick books when the ADF is open while preventing the area outside the original
image from being printed in black.
For details, refer to page 15-62.
Tips
- The scanning area on the Original Glass is the same as the specified paper size. Place the original with-
in the scanning area.
- The size of the original automatically detected is 3/8 inch e 3/8 inch (10 mm e 10 mm) or larger. If the
size detection fails, a blank sheet of paper is output.
- The top or end of the original image may be cut off.

Muratec MFX-C3680 Specifications

General

Brand	Muratec
Model	MFX-C3680
Category	Copier
Language	English