Binding Copied Paper 6-2
6
6 Binding Copied Paper
Staple papers ([Staple])
Each set of copied sheets is stapled (in a corner or two positions) before it is output. This function is useful
for preparing a project proposal or other booklet materials.
For details, refer to page 15-12.
Tips
- The Finisher is required to use the Staple function.
Punching the printed sheets ([Punch])
Copied sheets are punched for filing before they are output. This function is useful when you want to bind
printed materials in files.
For details, refer to page 15-12.
Tips
- To use the Punch function:
–The Finisher C2280FN2 and Punch Kit C2280PUN or the Finisher C2280FN and Punch Kit
C2280PUN are required.
To Next Page
Loading...
Need help?
General
