Description of Setup Buttons 15-17
15
[Original Settings]
To display: [Copy] - [Application] - [No. of Originals] - [Original Settings]
Set the options to scan originals correctly based on their properties.
Settings Description
[Original Setting] Set the options to scan originals correctly based on their properties.
• [Mixed Original]: Even for an original containing pages of different sizes,
by using the ADF, you can scan data while the size of each page is de-
tected. For details, refer to page 15-18.
• [Thin Paper Original]: Reduce the original feed speed of the ADF to pre-
vent the original from getting caught. For details, refer to page 15-18.
• [Z-Folded Original]: The size of the original - even folded originals - can
be detected accurately. For details, refer to page 15-19.
• [Booklet Original]: Scan a catalog with the staples removed as a 2-sid-
ed original, make a 2-sided copy, and staple the center of the paper in
the same manner as the original catalog. For details, refer to
page 15-19.
[Despeckle] Scan originals using the ADF while removing dust on the Slit Scan Glass.
For details, refer to page 15-20.
[Blank Page Removal] Blank pages contained in the original loaded into the ADF are skipped
when the original is scanned.
For details, refer to page 15-20.
[Binding Position] When scanning a 2-sided original, select the original binding position to
prevent the binding positions be reversed between the front and rear faces.
For details, refer to page 15-21.
[Original Size] If the size of the original is not detected correctly, select a key indicating
the size of the original to be scanned.
For details, refer to page 15-21.
[Original Direction] Specify the orientation of the loaded original.
For details, refer to page 15-22.
To Next Page
Loading...
Need help?
General
