Description of Setup Buttons 15-41
15
[Image Shift]
To display: [Copy] - [Application] - [Layout] - [Image Shift]
You can fine tune the image position by shifting it in a horizontal or vertical direction according to the paper
size. When an image is printed on the back side, you can also fine tune its position.
Settings Description
[ON]/[OFF] Select [ON] to shift an image.
[Front Side]/[Back Side] Adjust the image position on the print paper, by shifting the original image
in horizontal or vertical direction.
• [Shift Left]/[Shift Right]: Shifts the image to the left or right. Adjust the
shift amount by tapping [+]/[-] for the inch area, or by tapping [+]/[-] or
pressing the Keypad for the centimeter area.
• [Shift Top]/[Shift Bottom]: Shift the image upward or downward. Adjust
the shift amount by tapping [+]/[-] for the inch area, or by tapping [+]/[-
] or pressing the Keypad for the centimeter area.
[Apply on Back] Set this item to use the same settings as used on the front side for the rear
side of the print paper.
[Original Direction] Specify the orientation of the loaded original.
To Next Page
Loading...
Need help?
General
