Description of Setup Buttons 15-7
15
[Zoom]
To display: [Copy] - [Zoom]
Copy an original image enlarged or reduced by an arbitrary zoom ratio.
[Metric Sizes] When loading wide paper in metric sizes into paper tray, select the paper
size.
Settings Description
Settings Description
[Auto] Press this button to automatically make a copy with the optimal zoom ratio
to match the image of the original with the paper size. This is convenient
because you do not need to specify the zoom ratio.
[+]/[-] Enter a zoom ratio manually. You can also enter the zoom ratio from the
Keypad.
Fixed Zoom Select a preset zoom when copying from a standard size original onto a
standard size sheet of paper.
The paper tray is selected automatically according to the selected zoom
ratio.
[Minimal] Place an original image in the center after slightly reducing the size of the
original when copying.
Select this option when copying the entire original image, including its edg-
es.
[Manual] Specify zoom ratios individually for the lengthwise and widthwise direc-
tions for copying.
Select [X] or [Y], and enter a zoom ratio by tapping [+]/[-] or pressing the
Keypad.
[Zoom Ratio] Copy with the registered zoom ratio.
If you tap [Set Zoom], you can change the registered zoom ratio.
To Next Page
Loading...
Need help?
General
