Muratec MFX-C3680 User's Guide Copy Operations

Description of Setup Buttons (Administrator Settings) 17-65
17
[Personal Data Security
Settings]
Specify whether to hide personal information, such as destination and file
name, in [In Progress] and [Log] on the [Job List] screen.
For details, refer to page 17-68.
[Hide Personal Information
(MIB)]
Specify whether or not to display the file name, destination, and User Box
name and number of the MIB information.
For details, refer to page 17-68.
[Display Activity Log] Select whether to show the activity log on Scan, Fax TX and RX.
For details, refer to page 17-68.
[Initialize] Initializes the settings in [Job History], [Copy Program], [Network Settings],
and [Store Address].
For details, refer to page 17-69.
[Secure Print Only] Specify whether the printing from the computer should be limited only to
the security document.
For details, refer to "User's Guide [Print Operations]/[Description of Setup
Buttons (Administrator Settings)]".
[Copy Guard] Select whether to use Copy Guard.
To use Copy Guard, the Security Kit is required.
For details, refer to page 17-69.
[Password Copy] Select whether to use the Password Copy function.
To use the Password Copy function, the Security Kit is required.
For details, refer to page 17-69.
[Web browser contents ac-
cess]
Specify whether to allow an access to the Web page contents being saved
on the hard disk of the MFP.
For details, refer to page 17-69.
[TX Operation Log] Select whether to obtain an operation log on the Control Panel when
scanning or sending a fax as a send operation log. This will help to analyze
security issues if any occur.
For details, refer to page 17-69.
Settings Description

Muratec MFX-C3680 Specifications

General

Brand	Muratec
Model	MFX-C3680
Category	Copier
Language	English