Muratec MFX-C3680 User's Guide Copy Operations

Specifying the Original Size and Scan Method 7-5
7
2 Tap [Application] - [No. of Originals] - [Separate Scan], and set to [ON].
3 Press the Start key.
The original is scanned.
4 Load the next original, then press Start key.
% If desired, tap [Change Setting] to change the copy settings according to the new original.
5 Repeat Step 4 until all pages of the original are scanned.
6 After all originals are scanned, tap [Finish] and press the Start key.
Copying begins.
Related setting
- You can select whether to scan originals continuously at all times even though [Separate Scan] is not
specified when scanning originals using the Original Glass (Default: [OFF]). For details, refer to
page 16-7.
- You can select the timing that the copy begins when scanning an original by specifying [Separate Scan].
(Default:[Page Print]) For details, refer to page 16-12.

Muratec MFX-C3680 Specifications

General

Brand	Muratec
Model	MFX-C3680
Category	Copier
Language	English