EasyManuals Logo

MUTOH Rockhopper 3 User Manual

MUTOH Rockhopper 3
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Troubleshooting
12 AP-74700 – Rev. 1.0 – 10/03/2008
(3) The Mainboard
may be damaged.
Replace the
Mainboard
assembly.
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
(1) Check if the
message is still
displayed after
turning the power off
and then back on
again.
When a message
is displayed : Go
to step (2)
-
(2) The amount of
waste ink inside the
tank reached the
specified level.
Dispose of the
waste ink in the
waste bottle.
-
8 Warning Waste
INK Tank
The waste tank will
soon be full.
(3) If initialization
does take effect
when the waste ink
is disposed of and
waste ink history is
initialized, the
Mainboard may be
damaged.
Replace the
Mainboard
assembly.
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
(1) Check if the
message is still
displayed after
turning the power off
and then back on
again.
When a message
is displayed : Go
to step (2)
-
(2) The number of
times the ink tube
was used reached
the maximum
allowable times.
Replace the ink
tube.
Initializing CR
motor history.
Replacing the
steel bearer, tube
guide, Flatcable
and ink tube.
9 Warning Waste
INK Tank
The service life of the
ink tube will soon be
reached.
(3) If initialization
does take effect
when the CR motor
history is initialized
after the ink tube is
replaced, the
Mainboard may be
damaged.
Replace the
Mainboard
assembly.
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
(1) Check if the
message is still
displayed after
turning the power off
and then back on
again.
When a message
is displayed :
refer to step (2)
10 (Warning Head
Life)
The service life of the
print head will soon be
reached.
(2) The number of
times the print head
was used reached
the maximum
allowable times.
Replace the print
head assembly.
Initialize the head
unit.
Replacing the
print head
assembly and head
tape power cable.
Counter
initialization menu.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MUTOH Rockhopper 3 and is the answer not in the manual?

MUTOH Rockhopper 3 Specifications

General IconGeneral
BrandMUTOH
ModelRockhopper 3
CategoryPrinter
LanguageEnglish

Related product manuals