153
6-2. Table of High-level Instructions
5. Logic Operation Instructions
6. Data Conversion Instructions
• A: Available, N/A: Not available
• Specification of flag operation in the above tables:
[↕] The flag (special relay) available for the instruction (turns ON/OFF according to the condition).
[ ](blank) The flag (special relay) not available for the instruction (keeps the state regardless of the instruction).
• Details about the instructions with a * mark are described in this manual.
Refer to the pages in the far right column of the above tables.
For high-level instructions without a * mark, refer to “FP-M/FP1 Programming Manual”.