NAiS FP1 User Manual

Notes:
• * The availability of instructions and functions depends on the type of the programmable controller and
the CPU version. For details about functions available for FP1 CPU version 2.7, refer to page 245, “8-
7. FP1 CPU Version 2.7”.
• ** The OP 21 function is not used by the FP1.
• *** If the OP 74 function is executed, the program stored in the programmable controller will be deleted.
Item
OP 21 (route number
settings)**
OP 72 (password
enabled/disabled
settings)
OP 73 (password
registration function)
OP 74 (password
forcing clear function)***
OP 91 (program/system
register read/write
function)
OP 92 (system register
read/write function)
OP 99 (EEPROM write
function)*
OP 112 (Error
cancellation function)*
FP Programmer
(AFP1112)
Available.
Only routes 1 to 3 can
be selected.
Not available
Not available
Not available
Not available
Not available
Available.
However, "BCC ERR" is
displayed on the LCD if
a program with more
than 11 k steps is written
to EEPROM.
Not available
FP Programmer
(AFP1112A)
Available
Routes 1 to 6 can be
selected.
Available
Not available
Not available
Not available
Not available
Available
Not available
FP Programmer II
(AFP1114)
Available
Routes 1 to 6 can be
selected.
Available
Available
Available
Available
Available
Available
Available
244
8-6. Versions of Programming Tools

NAiS FP1 Specifications

General

Brand	NAiS
Model	FP1
Category	Controller
Language	English