NARDA FieldMan User Manual

10 Cross-mode functions
106 FieldMan Narda
10.7 Peak marker
In addition to the marker, the peak marker is available for evaluating the peak values in
the following operating modes.
• FIELD STRENGTH
• SPECTRUM
• SHAPED TIME DOMAIN
• TIMER LOGGING (after calling the measurement in the DATA LOGGER)
For this purpose, up to 25 peak values are recorded and sorted in descending order.
Number 1 is the highest peak value. The selected peak value is displayed within the
cross key symbol.
Marker type On/Off Symbols Representa-
tion
on the display
Control via cross
key
Off On
Marker SK1 ◄ ► ◄ ►
Peak Marker SK4 ◄ ►
▲▼
Use the Peak Marker:
✓ The marker is switched on (see the descriptions in the respective operating modes).
1. Press SK4 to switch on the peak marker.
2. Move the marker:
a. Use the ◄ ► keys to move the marker to the nearest peak on the left or right.
b. Use the ▲▼ keys to move the marker to the next higher or next lower peak.
↳ The selected peak value is displayed within the cross key
symbol.
3. Press SK4 to turn the peak marker off again.

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English