NARDA FieldMan User Manual

7 Device settings
48 FieldMan Narda
7.5.2 Band-Filter
7.6 POSITION AND TIME
In this submenu, settings are made which affect the position determination by means of
the satellite receiver and the integrated ultrasonic distance sensor. The system time of
the device can also be set or synchronized with the very accurate satellite time. The
results of the GNSS position determination are also displayed.
Parameter Default Description
Apply Correction Factor
CF
Off Apply correction factor on/off
Reference Frequency Fmin
(probe dependent)
Reference frequency for correction
factor and for % of standard
% of Standard Off Conversion to display in % of stan-
dard for measured field strengths at
a reference frequency
Standard ICNIRP 1998 Occ Applied standard
In this submenu, settings for a bandpass or bandstop filter with variable center frequency
can be made for suitable probes (currently only BFD-400). After switching on, the filter
has an effect only in the broadband modes FIELD STRENGTH, SPATIAL AVERAGE
and TIMER LOGGING.
Parameter Default Description
Band-Filter Off Switch band filter on/off
Filter Type Band-pass Filter type
Center Frequency 50 Hz Center frequency of the filter

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English