NARDA FieldMan User Manual

9 DATA LOGGER
94 FieldMan Narda
9.3 Managing measurements
(MEASUREMENTS)
In the MEASUREMENTS menu, the measurements stored in a project can be called up
and evaluated, supplemented with comments or deleted.
Select a measurement:
✓ The desired project has been selected
(see 9.2 Managing projects (PROJECT) on page 93).
1. Mark MEASUREMENTS and select it with the
● or ► key.
↳ The submenu opens.
2. Mark the desired measurement.
You now have the following options:
• Open and evaluate the measurement
• Add a text comment
• Add a voice comment
• Delete the measurement
9.3.1 Open and evaluate a measurement
⇒ Open the marked measurement with the ● or ► key.
↳ The measurement is displayed.
Additional functions are available via the keys SK1 to SK4:
Turn on the marker
Change measurement settings
(limited selection, e.g. change the measurement unit)
Show previous measurement of the selected project
Show next measurement of the selected project
Using the marker
1. Press SK1 to turn on the marker.
2. Use the ◄ ► keys to move the marker to the desired position on the measuring
curve.
3. Press SK1 to turn the default marker off again.
⇒ For more information on the marker functions, see the descriptions in the operating
modes.

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English