NARDA FieldMan User Manual

2 General safety instructions
12 FieldMan Narda
2.1 Using these operating instructions
⇒ Read these operating instructions carefully and completely before working with the
device.
⇒ Keep these operating instructions at hand so that they are always available to all us-
ers when working with the device.
⇒ Only pass the device on to third parties together with these operating instructions.
2.2 Intended use
The Narda FieldMan is used to measure and evaluate electromagnetic fields.
⇒ Only operate the device under the conditions and for the purposes for which it was
designed.
⇒ Pay particular attention to the technical specifications in the data sheet for the device.
Intended use also includes the following:
⇒ Observe the national accident prevention regulations at the deployment location.
⇒ The device may only be operated by appropriately qualified and trained personnel.
2.3 Non-intended use
The Narda FieldMan is not a warning device that actively warns of the existence of
dangerous fields by means of visual or acoustic signals.
⇒ Always consider the device as a measuring device, never as a warning device.
⇒ Only approach unknown field sources while carefully observing the current measured
value display.
⇒ In case of doubt, use an additional warning device such as RadMan or Nardalert
from Narda Safety Test Solutions.
2.4 Dangers due to electromagnetic fields
2.4.1 Strong fields
Very strong electromagnetic fields occur near many radiation sources.
⇒ Observe safety barriers and markings.
⇒ In particular, persons with electronic implants must keep away from dangerous areas.

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English