EasyManuals Logo

NARDA FieldMan User Manual

NARDA FieldMan
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
7.8 INFORMATION
Narda FieldMan 51
7.7.4 ETHERNET
7.8 INFORMATION
This submenu displays device and probe-specific information. In addition, the user or a
calibration laboratory can update the third-party calibration date and recommended cali-
bration interval for all probes except the HP-01 and EHP-50F/G. For probes with self-test
capability, the test can be performed here.
7.8.1 DEVICE INFORMATION
Parameter Default Description
Ethernet Off LAN on/off
With LAN = Off the following lines
are grayed out
DHCP On If DHCP is enabled, the following
lines are grayed out
IPv4 Address 192.168.128.128 Settings menu, individually scrollable
digit groups
Subnet Mask 255.255.255.0 Settings menu default masks 1...32,
default 24
IPv6 Address fc00::192:168:128:
128
Settings menu, individually scrollable
digit groups
Prefix 7 Prefix length of the IPv6 address
MAC Device-dependent Individual MAC address of the Field-
Man
Parameter Default Description
Device Self-Test START Starts self-test to be performed in
separate window (also performed at
each restart)
Product Name FieldMan Product name
Part Number 2461-01 Article number
Serial Number A-0051 Serial number
Firmware Version V1.0.0 Firmware version

Table of Contents

Other manuals for NARDA FieldMan

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NARDA FieldMan and is the answer not in the manual?

NARDA FieldMan Specifications

General IconGeneral
BrandNARDA
ModelFieldMan
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals