6 General operation
42 FieldMan Narda
6.3 The display in measuring mode
The displays in the operating modes are always structured in the same way. The dis-
played measured values, evaluations and graphical representations then differ depend-
ing on the operating mode, the probe used and the selected settings.
⇒ Detailed information on the displays can be found in the descriptions of the operating
modes.
No. Area Values
1 Selection field • Display type: ACTUAL, AVERAGE...
• Detector type: RMS, Peak
2 Main field Measured value display
X/Y/Z only for ACTUAL, the unit can be selected
3 Status bar When the measurement is running, a bar indicates the prog-
ress of the averaging.
4 Supplementary
field
Evaluations
MAX, MIN, MAXAVG, AVG and the current averaging time
until the set time is reached.
5 Graphic display • Temporal or spectral display of the measurement results
• Bar graph of the instantaneous value.
1
2
3
4
5
To Next Page
Loading...
