NARDA FieldMan User Manual

7 Device settings
52 FieldMan Narda
7.8.2 PROBE INFORMATION
Bootloader Version V1.0.1 Bootloader version
Image Version V1.0.2 The image contains all SW compo-
nents
<option name> P/N of the option Display only if option is enabled
Parameter Default Description
Probe Self-Test START Starts self-test to be performed in
separate window (also performed
each time the probe is connected)
Product Name EFD-0691 Probe product name
Part Number 2462/14 Probe article number
Serial Number A-0051 Probe serial number
Field Type E Field type
Shaping Standard No shaping Standard
Lower Frequency Limit 0.1 MHz Lower cutoff frequency
Upper Frequency Limit 6000 MHz Upper cutoff frequency
Firmware Version V1.0.0 Firmware version of the probe
Bootloader Version V1.0.0 Bootloader version of the probe
Temperature Sensor 15.7 °C Probe temperature
Narda Calibration Date 2022-12-15 Last calibration by Narda
Third-Party Calibration
Date
– Calibration date of other suppliers
can be entered here by the user.
Recalibration after
(months)
24 Number can be edited here by the
user.
<option name> P/N of the option Display only if option is enabled
Parameter Default Description

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English