8 Operating modes
72 FieldMan Narda
8.4.2 Sequence of a time-controlled measurement
1. Select timer settings
• Start Time
• Timer Duration
• Storage Interval
⇒ See 8.4.1 Measurement settings on page 71.
2. Activate comment functions (if required)
• Add Text Comment
• Add Voice Comment
⇒ See 7.3 GENERAL SETTINGS on page 45.
3. Activate timer
⇒ Press SK3.
↳ When the comment function is activated, the user is prompted for a voice com-
ment and/or text input.
↳ The device waits until the specified start time for the measurement.
↳ The setting for automatic shutdown (Automatic Shutdown) is ignored and the
device remains switched on (see 7.3.5 DEVICE on page 47).
The following actions are possible during this time:
Start recording immediately:
⇒ Press SK3.
Deactivate timer again:
⇒ Press SK1.
↳ In this case, previously recorded voice or text comments will be deleted.
To Next Page
Loading...
