Native Instruments Maschine Getting Started

2. Click the desired Patterns for Scene 2.
The selected Patterns will play when Scene 2 is selected.
→ By repeating these two steps for all Groups you want to use in this Scene, you progressive-
ly build up a new Scene.
You might also want to remove a Pattern from a Scene:
►
To remove a Pattern from a Scene, simply click it.
→
The Pattern is removed from the Scene. You will note that the corresponding Pattern has
only been dimmed and not deleted. You can click the Pattern again to reselect it for the
Scene.
8.2.2 Creating other Scenes using the Controller
Let’s select the second Scene:
1. Press NAVIGATE + Button 2 to enter Ideas view.
2. Press and hold the SCENE button.
The pads now represent available Scenes. For the moment only pad 1 is lit: This indicates
that Scene slot 1 is selected and all other slots are empty.
Creating Scenes
Assigning Patterns to Scenes
MASCHINE - Getting Started - 111

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs