Native Instruments Maschine Getting Started

On the right display you see the available Perform Grid values. The current value is highlighted
and the corresponding pad is lit. The default value SCENE means that the next time you select
a new Scene, the switch will happen once the current Scene has played to the end.
1. Press a pad to select the desired value, for example pad 9 (for 1/4, a quarter note).
→
The next time you select a new Scene, the switch will happen on the next quarter note.
To adjust the Retrigger setting:
1. Press and hold SCENE to enter Scene mode (or pin it by pressing SCENE + Button 1).
2. Press the right Page button to Select Page 2/2.
⇨ At the bottom left corner of the left display you see the current RETRIGGER value (OFF
by default).
3. Turn Knob 1 to select ON.
→ The next time you select a new Scene, it will start from the beginning.
8.5 To Sum Up…
In this tutorial, we have learned to:
▪ Create a Scene using our Patterns.
▪ Select a Scene for playing.
▪ Pin the various controller modes.
▪ Rename, color, duplicate, and delete Scenes slots.
Once you feel comfortable with these few tasks, proceed with the next chapter, where you can
quickly assign your Scenes to Sections to create an arrangement.
Creating Scenes
To Sum Up…
MASCHINE - Getting Started - 117

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs