3 Building Your Own Drum Kit
In this tutorial, you will exchange some of the Sounds of your drum kit, and adjust a few set-
tings for your Project and your Group. On the way, you will discover some features of the MA-
SCHINE software user interface.
Prerequisites
It is assumed here that you have followed the previous tutorial. In particular, you already know
how to:
▪ Load a Group using the Browser.
▪ Use the pads to play the Sounds of that Group.
▪ Record a simple Pattern with that Group.
▪ Save the current Project for a later use.
If you have any doubts about these tasks, please refer to chapter ↑2, First Steps before pro-
ceeding!
3.1 Opening Your Project
If for any reason your tutorial Project is not currently open in MASCHINE (e.g., you opened an-
other Project in the meantime), you first need to open it again. You can do this with the con-
troller or in the software, for example using the MASCHINE Browser.
If you closed MASCHINE and started it again, your last Project should automatically
load by default. If you changed this setting, follow these instructions to load the tutorial
Project again!
If the tutorial Project is already open in MASCHINE, you can skip to section ↑3.2, Customizing
Your Drum Kit.
Building Your Own Drum Kit
Opening Your Project
MASCHINE - Getting Started - 33
To Next Page
Loading...
Need help?
General
