Native Instruments Maschine Getting Started

2. Press Button 1 or Button 2 above the displays to select PROJECT.
This way, only Projects will be displayed now on the right display.
3. Press Button 4 to select USER content.
This will display only the Projects you have created.
4. In case you have already created more than one Project, turn Knob 8 until MY FIRST
PROJECT is selected on the right display.
5. Press Button 8 to load the Project.
6. Press BROWSE to leave the Browser.
That’s it! Now you can continue to work on your tutorial Project.
You will note that every action you did on the controller is directly mirrored in the
Browser of the MASCHINE software. This is true in both directions!
3.2 Customizing Your Drum Kit
You might want to replace one or more drums from the Group “EK-TL A Kit” with ones that
sound better with your Pattern. To do this, you must make use of the Browser again.
3.2.1 Selecting another Snare Sample
For the sake of providing an example, you will replace the Sample “Snare Ektl A 2” used in
the Sound of the pad 6. You want something less intrusive.
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE - Getting Started - 36

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs