2. In the Content selector to the right, click the User icon to select only the user-created
Projects:
In the result list below, you now have one unique Project left — your “My First Project”:
3. Double-click this unique entry to load the Project in MASCHINE.
Of course, if you have already created other Projects in MASCHINE, they will also ap-
pear in the result list along with your tutorial Project.
Opening a Project using the Controller
Now try operating MASCHINE via the MASCHINE MK2 controller wherever possible. To open a
Project via the controller, you will follow the same process as above, filtering MASCHINE ob-
jects to narrow your search until you find your tutorial Project. This is similar to what you did
when loading a drum kit in the previous tutorial. Do the following:
1. Press BROWSE to show the Browser.
The BROWSE button lights up.
Building Your Own Drum Kit
Opening Your Project
MASCHINE - Getting Started - 35
To Next Page
Loading...
