VS1 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-10-01 Page 2-15
System Settings - OS Recovery Initiate a recovery reset of the operating system in
the event of a failed software upgrade.
page 2-104
System Settings - Firmware
Update
Perform a software upgrade on the transmitter. page 2-105
System Settings - FM Polarity Set the polarity for FM deviation; positive
modulation signal yields positive frequency
deviation or negative modulating signal yields
positive frequency deviation.
page 2-105
Help Provides instructions for navigating through the
front panel UI screens.
-
Table 2.1: Front Panel UI Screens
UI Screen Function See Page
To Next Page
Loading...
