VS1 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-10-01 Page 2-69
Figure 2.50: Output Power screen
Table 2.4: Maximum power level set points **
Mode and IBOC
Injection Level
(as applicable
for IBOC modes)
Maximum Power Set Point Limit (W)
(linearly interpolate between frequencies)
88.0 MHz 98.0 MHz 108.0 MHz
No PowerBoost PowerBoost No PowerBoost PowerBoost No PowerBoost PowerBoost
FM+HD, -20 dB
812 912 1012 1131 993 1093
FM+HD, -19 dB
777 881 967 1087 944 1053
FM+HD, -18 dB
742 850 922 1043 896 994
FM+HD, -17 dB
705 815 875 997 843 939
FM+HD, -16 dB
669 780 828 951 791 884
FM+HD, -15 dB
631 741 780 903 735 825
FM+HD, -14 dB
594 703 732 855 679 765
FM+HD, -13 dB
555 661 681 805 675 700
FM+HD, -12 dB
516 619 631 755 560 635
FM+HD, -11 dB
477 573 579 703 496 564
FM+HD, -10 dB
437 527 527 651 432 494
FM
812 1012 993
HD, -20 dB
480 (all frequencies)
HD, -14 dB
390 (all frequencies)
HD, -10 dB
350 (all frequencies)
** Maximum power set point limits can vary from the indicated value for various reasons. Nautel does not
guarantee performance at the indicated values.
To Next Page
Loading...
